Loops get out of sync when clocked with MPC5000 via midi

coxiopioxio · April 2012

When I use Loopy HD with my MPC5000 or MPC2000xl, the loops get WAY out of sync. They seem to sporadically recalculate when the loop should start. When I clock the MPC to Loopy, Loopy works fine.

ALSO, it be nice to have a latency control. Turning on or off loops doesn't really work in real time.

Michael · May 2012

Hey @coxiopioxio - D'oh, I'm sorry to hear that. I've recently done a big refactor/optimise/rewrite of a large chunk of Loopy, which has touched on MIDI sync. I'll be updating in a week or so, probably, so I'd be interested to see if your problem persists afterwards.

hottatunes · May 2012

using with yamaha imx1 midi interface and roland ax7 keytar sending midi start stop .
every loop plays at the same tempo [120 bpm] when i start remotely ...this is super annoying ..how do i fix.

Michael · May 2012

(answered you on this thread: http://forum.loopyapp.com/discussion/199/loopy-hd-defaults-all-loops-at-120-bpm-with-midi-remote-start-#Item_2)

Loops get out of sync when clocked with MPC5000 via midi

Comments